I-Mag-11 series clamp type electromagnetic flowmeter yenzelwe ukusetshenziswa kwenhlanzeko. Inzwa yohlobo oluhlanganisiwe yenziwe ngensimbi engagqwali, kanti izinto zokufakwa kwendwangu ziyi-FEP / PFA, ezingahlangabezana nezidingo ze-hygeian zendwangu, esetshenziswa kabanzi ekudleni, eziphuzweni, emithini nakwezinye izimboni. Le nqubo ivame ukudinga ukuhlanzwa njalo kanye nokubulala amagciwane, ukuze ihlukaniswe kalula, ngokuvamile kusetshenziswa uxhumano lwe-clamp kanye nepayipi lokuhlola. Uhlobo oluncane nolukude luyatholakala.
Izici
Akukho ngxenye ehambayo futhi akukho ukwehla kwengcindezi
Ukunemba okuphezulu kwenani lokufunda elingu-±0.5%
Kwenziwe ngensimbi engagqwali yezinga lokudla engu-304
Kala ukugeleza kwesiqondiso esiya phambili nesibuyela emuva.
Izindlela eziningi zokuxhumana, njenge-4-20mA, i-RS485 Modbus, i-Pulse kanye ne-Hart
Amapayipi e-DN10-80 ayatholakala
Ulwelwesi lwe-FEP kanye ne-PFA lukhethwa ngokuzithandela
Ingalinganisa ukugeleza koketshezi oluhlukahlukene oluqhubayo (ukuqhuba ＞5uS/cm)
Imininingwane
Isiguquli:
| Isibonisi | Isibonisi se-LCD sesiNgisi esinemigqa emi-4, sibonisa idatha yokugeleza phambili nokubuya emuva, iphesenti lokugeleza kanye nesivinini sokugeleza. |
| Ukusetha Ipharamitha | Ukusetha amapharamitha ngenkinobho, isilawuli kude esibukhali kakhulu kanye ne-Bluetooth (ifoni ehlakaniphile). |
| Ulimi | IsiShayina, isiNgisi; Ungenza ngokwezifiso isiShayina sendabuko, iSpanishi, nesiKorea |
| Umphumela Wamanje | 4-20mA, Ukumelana Nomthwalo ≤ 500Ω(faka ukumelana nekhebula), i-Hart |
| I-PIO | Ungakhetha ukuphuma kwe-pulse okungasebenzi, ukuphuma kwe-pulse okusebenzayo, ukuphuma kwe-state/alamu kanye nokufakwa kwesignali yokuxhumana. |
| Umphumela we-Passive Pulse: 30VDC(Valiwe), 200mA(Vuliwe); 0.0001-5000Hz; Ububanzi be-Pulse: umjikelezo womsebenzi ongu-50% noma inani elihleliwe (≤100ms) | |
| Umphumela we-Active Pulse: 0.0001-2000I-Hz, ≤150mA, 15VDC±20%; Ububanzi be-Pulse: ≤100ms (Inani elizenzakalelayo:20ms) | |
| Umphumela Wesimo/We-alamu: Umthamo Wokuxhumana: 30VDC(Valiwe), 200mA(Vuliwe) | |
| Okungenayo Kokuxhumana: Oxhumana naye ongasebenzi, Ukumelana Nomthwalo: kuvaliwe ≤ 200Ω, kunqanyuliwe ≥100kΩ | |
| Ukuxhumana | I-RS485 (MODBUS-RTU),I-BACNET, i-HART |
| Ukunikezwa kwamandla kagesi | 220VAC50Hz/60Hz,24VDC, 100-240VAC |
| I-alamu | I-alamu yepayipi engenalutho, i-alamu ebuyela emuva, i-alamu yomkhawulo ophezulu kanye ne-alamu yomkhawulo ophansi |
| Isigaba sokuvikela | I-IP65, IP67 |
| Ukunemba | 0.5%, 0.3%, 0.2% |
| Ivikela ukuqhuma | I-Exia/db II CT3 ~ T6 Ga / Gb Ex tb III CT 200℃ Db |
| Isakhiwo | Incane noma ikude |
Inzwa:
| Ububanzi | I-DN10-DN80 |
| Izinto ze-electrode | SS316L |
| Izinto zokufaka ulwelwesi | I-FEP, i-PFA |
| Izinto zegobolondo | Insimbi Engagqwali (304,316,316L) |
| Ipayipi elifushane loketshezi | Izinto: 316L; Izinga le-clamp: DIN32676 noma ISO2852 |
| Ibanga lokushisa | -40°C~+140°C |
| Isigaba sokuvikela | I-IP65, IP67, IP68 |
| Uxhumano | Izinto 304, izinga lokubopha: DIN32676, ISO2852, 3A |
| Ingcindezi yokusebenza ephezulu | 1.6Mpa |
Ubukhulu
| Ububanzi mm | Usayizi Womzimba mm | Ububanzi obungaphandle beChuck | ||||
| L | D | H | I-DIN32676 | I-ISO2852 | 3A | |
| 10 |
150 |
84 |
125.5 | 34 | 34 | 25 |
| 15 | 34 | 34 | 25 | |||
| 20 | 34 | / | / | |||
| 25 | 50.5 | 50.5 | 50.5 | |||
| 32 | 93 | 134.5 | 50.5 | 50.5 | / | |
| 40 | 99 | 140.5 | 50.5 | 50.5 | 50.5 | |
| 50 | 112 | 153.5 | 64 | 64 | 64 | |
| 65 | 200 | 125 | 166.5 | 91 | 77.5 | 77.5 |
| 80 | 137 | 178.5 | 106 | 91 | 91 | |
Ukukhethwa Kwezinto Ze-Electrode
| Izinto | Ikhodi | Ukusebenza Kokumelana Nokugqwala |
| 316L | V | Isetshenziswa emanzini ezimboni, emanzini asekhaya, emanzini angcolile, esixazululweni esingathathi hlangothi kanye ne-asidi ebuthakathaka njenge-carbonic acid kanye ne-acetic acid. |
| I-Hastelloy Alloy C | Hc | I-asidi yokumelana ne-oxidation, njenge-asidi ye-nitric, i-asidi exubile, i-asidi eyinkimbinkimbi exutshwe ne-asidi ye-sulfuric. Inokonakala okuhle ukumelana namanzi olwandle, isixazululo se-alkali kanye nesixazululo se-chloride. Ayisebenzi ku: i-hydrochloric acid kanye ne-Hydrofluoric acid |
| I-Hastelloy Alloy B | Hb | Inokumelana okuhle kokugqwala ne-non-oxidative acid, i-alkali, nosawoti. Ayisebenzi ku: i-nitric acid. |
| Ti | Ti | Ziyakwazi ukumelana nokugqwala kahle emanzini olwandle, i-chloride, i-hypochlorite kanye nama-hydroxide ahlukahlukene. Ayisebenzi ku: ukunciphisa ama-asidi njenge-hydrochloric acid, i-sulfuric acid, i-hydrofluoric acid. |
| Ta | Ta | Cishe zinamandla okugqwala kuzo zonke izinhlobo zamakhemikhali, ezivame ukusetshenziswa kwi-hydrochloric acid kanye ne-sulfuric acid. Ayisebenzi ku: i-hydrofluoric acid, i-alkali kanye ne-fuming sulfuric acid. |
| I-Tungsten Carbide | W | Zinokumelana okuhle nokuguguleka, zisetshenziselwa izinto ezigqokwayo njengodaka kanye ne-paper pulp, kodwa azinakumelana nokugqwala kahle. |
| I-Platinum-iridium Alloy | Pt | Ngaphandle kwe-aqua acid kanye nosawoti we-ammonium, cishe inokumelana nokugqwala kuzo zonke izixazululo ze-asidi, i-alkali kanye nosawoti. |
Ukukhethwa Kwezinto Zokumboza
1. Kwezinto ezisebenzisa izinga lokushisa eliphezulu (≥140℃), ukukhetha ulwelwesi lwe-PFA.
2. Ukuze uthole imidiya enemfuneko yokuhlanzeka, kufanele ukhethe ulwelwesi lwe-FEP
3. Ukuze uthole izinto ezigqokwayo ezifana ne-slurry kanye ne-pulp, kufanele ukhethe i-FEP lining.
4. Ukuze kube lula ukukala imidiya njenge-pulp yephepha, kukhethwa i-FEP noma i-PFA lining.
5. Uma kwenzeka ingcindezi engemihle, kufanele ukhethe i-FEP.
| Izinto | Ukusebenza Kokumelana Nokugqwala | UkusebenzaIzinga lokushisa | Ibanga Elisebenzayo | Ububanzi(mm) |
| I-FEP | Ukumelana nokugqwala kufana ne-PTFE. | -40 ~150℃ | Konke uketshezi ngaphandle kwezinto ezigugile ezifana nodaka. | I-DN3-400 |
| I-PFA | Iyakwazi ukumelana nokugqwala kuzo zonke izinhlobo zamakhemikhali. Ukumelana nokushisa kungcono kune-FEP. | -40~180℃ | Kufana ne-PTFE, ukukhetha izinga lokushisa eliphakeme elihlala isikhathi eside. | I-DN3-400 |
Ibanga Lokulinganisa Ukugeleza
Imitha yethu yokugeleza kagesi ngayinye kufanele ihlolwe ngokulinganisa okuqinile kwangempela ngaphambi kokushiya ifektri. Ngakho-ke uma ukhetha ibanga lokulinganisa, ngokuvamile ungaphuli umbandela othi "ububanzi kumele bube bukhulu kunokugeleza okulinganisiwe", futhi kungcono ukuthi ububanzi busondele ekugelezeni okulinganisiwe okuvamile. Ngokuvamile yenza ukugeleza okulinganisiwe okuvamile kube phakathi kuka-50% kuya ku-80%.
Ububanzi bokulinganisa be-Mag series electromagnetic flow-meter bungashintshwa ngokuya ngesimo sangempela.
Ijubane eliphezulu kakhulu lingafinyelela ku-12m/s.
| Ububanzi(mm)(DN) Ukugeleza Kwesilinganiso (m)3/h) | |||||||||||||||
| 10 | 0.1 | 0.16 | 0.2 | 0.25 | 0.3 | 0.4 | 0.5 | 0.6 | 0.8 | 1.0 | 1.2 | 1.6 | 2.0 | 2.5 | 2.8 |
| 15 | 0.2 | 0.4 | 0.5 | 0.6 | 0.8 | 1.0 | 1.2 | 1.6 | 2.0 | 2.5 | 3.0 | 4.0 | 5.0 | 6.0 | 6.3 |
| 20 | 0.4 | 0.6 | 0.8 | 1.0 | 1.2 | 1.6 | 2.0 | 2.5 | 3.0 | 4.0 | 5.0 | 6.0 | 8.0 | 10 | 11.3 |
| 25 | 0.6 | 1.0 | 1.2 | 1.6 | 2.0 | 2.5 | 3.0 | 4.0 | 5.0 | 6.0 | 8.0 | 10 | 12 | 16 | 17.7 |
| 32 | 0.9 | 1.6 | 2.0 | 2.5 | 3.0 | 4.0 | 5.0 | 6.0 | 8.0 | 10 | 12 | 16 | 20 | 25 | 28 |
| 40 | 1.4 | 2.5 | 3.0 | 4.0 | 5.0 | 6.0 | 8.0 | 10 | 12 | 16 | 20 | 25 | 30 | 40 | 45 |
| 50 | 2.1 | 4.0 | 5.0 | 6.0 | 8.0 | 10 | 12 | 16 | 20 | 25 | 30 | 40 | 50 | 60 | 70 |
| 65 | 4 | 6.0 | 8.0 | 10 | 12 | 16 | 20 | 25 | 30 | 40 | 50 | 60 | 80 | 100 | 120 |
| 80 | 6 | 10 | 12 | 16 | 20 | 25 | 30 | 40 | 50 | 60 | 80 | 100 | 120 | 160 | 180 |
| 100 | 8 | 16 | 20 | 25 | 30 | 40 | 50 | 60 | 80 | 100 | 120 | 160 | 200 | 250 | 280 |
| 125 | 13 | 25 | 30 | 40 | 50 | 60 | 80 | 100 | 120 | 160 | 200 | 250 | 300 | 400 | 440 |
| 150 | 19 | 40 | 50 | 60 | 80 | 100 | 120 | 160 | 200 | 250 | 300 | 400 | 500 | 600 | 630 |
| 200 | 34 | 60 | 80 | 100 | 120 | 160 | 200 | 250 | 300 | 400 | 500 | 600 | 800 | 1000 | 1100 |
| 250 | 53 | 100 | 120 | 160 | 200 | 250 | 300 | 400 | 500 | 600 | 800 | 1000 | 1200 | 1400 | 1600 |
| 300 | 76 | 160 | 200 | 250 | 300 | 400 | 500 | 600 | 800 | 1000 | 1200 | 1600 | 1800 | 2000 | 2500 |
Qaphela 1: Indawo ye-Bold yindlela esincoma ngayo ukugeleza.
Qaphela 2: Ifomula yokugeleza kanye nesivinini: V= 354 x F / D2(V: Ijubane, m/s, F: Ukugeleza, m3/h, D: Ububanzi, mm)
